TECEdrainline – drains and accessories
Flexible, hygienic, reliable: right up to the drain, TECEdrainline offers details that make the tried and tested shower channel especially attractive for fitters and customers.
Optimised for tough days on site
The connection of drain and channel is equipped with a strong snap lock that simply snaps shut when pushed on. This creates a tight and firm connection. Nevertheless, the drain can still be rotated.
Flexible all-round
TECEdrainline drains can be rotated through 360° for particularly easy connection to the drain pipe.
Doubly safe against odours
The retrofittable membrane odour trap for TECEdrainline drains provides a double siphon effect together with the sealing water. It minimises the evaporation of the sealing water through its membrane and excludes vermin - particularly suitable for infrequently used showers.
Easy to clean
In case of stubborn blockages, the drain pipe can be cleaned with a small hand spiral. A marking on the inside shows the position of the drain socket.
1 Sound decoupling, insulation
2 Edge insulation strips
3 Drain pot
4 Shower channel
5 Drain line
6 Screed
7 Combined sealing
8 Thin-bed tiling
(including sealing and tile adhesive)
h2: Height of drain includes shower channel, up to screed upper edge
h3: Height for sound insulation or insulation and drain line gradient
Drain as required
TECEdrainline drains are available in four variants for lateral connection and for vertical connection to the wastewater pipe. The selection of the drain pan is based on the required drainage capacity and the available construction height of the floor. The height for the floor insulation and the slope of the wastewater pipe should also be taken into account when making the selection.
| Drain | h2*[mm] | Capacity[l/s] |
|---|---|---|
| extra flat | 53 | 0,5 |
| flat | 80 | 0,8 |
| standard | 105 | 0,9 |
| max | 133 | 1,4 |
| vertical | 52 | 1,3 |
| *When using the TECEdrainline-Evo shower channel Height h2 + 2 mm in each case |
Drain extra-flat
TECEdrainline drain “extra-flat”, DN 40, side drain
Capacity 0.5 l/s, for swivelling installation on the channel body, with removable siphon dip tube
Drain max
TECEdrainline drain „max“ DN 70, side drain
Capacity 1.4 l/s, drain can be rotated through 360°, with removable siphon dip tube
Drain flat
TECEdrainline drain „flat“ DN 50, side drain
Capacity 0.8 l/s, drain can be rotated through 360°, with removable siphon dip tube
Drain vertical
TECEdrainline drain „vertical“ DN 50
Capacity 1.3 l/s, drain can be rotated through 360°, with removable siphon dip tube
Drain norm
TECEdrainline drain „standard" DN 50, side drain
Capacity 0.9 l/s, drain can be rotated through 360°, with removable siphon dip tube
Assembly feet
Assembly feet for easy height alignment and position fixing of the channel body during unfinished installation. Available in heights 94 to 142 mm and 139 to 182 mm.
Drainbase sound insulation mat
Sound insulation mat for installation under floating screed in the area of floor-level showers or in the entire bathroom. For reducing installation noise and for impact sound insulation for renovation and new construction.
Membrane odour trap
Plastic immersion pipe with inner sealing lip membrane as protection against evaporation, barrier against odour and vermin.
Hair trap
Hair trap made of stainless steel, for fitting
into the TECEdrainline channel body.
FireStop fire protection set
For direct installation on the drain TECEdrainline DN 50 vertical, for highly fire-resistant bulkheading of ceiling penetrations in solid ceilings.