TECEprofil – the solution: three components
Three components, all possibilities
You want to fulfil your customer’s wishes, design your everyday construction site activities and storage facilities as efficiently as possible, master technical challenges, assemble everything effortlessly and safely, comply with normative basics and deliver a safe installation. That’s a lot of requirements that we fulfil quite simply: with the basic components of TECEprofil pre-wall elements.
TECEprofil corner joint
- Connection with the corner joint is always automatically aligned at right angles
- Simplified assembly through pre-tensioned compression springs
- No die casting or plastic, but entirely sheet metal: also resistant in a fire
Automatically rectangular
- Tolerances of up to 10 mm are easily compensated for
- Diagonally cut sections or incorrect dimensions can also be tolerated by several mm
TECEprofil angle bracket
- The TECEprofil angle bracket is height- and depth-adjustable
- Accepts tolerances on the solid or dry-wall construction wall at all times
Angle bracket in use
- Solid bracket for wall attachment
- Compensation of structural tolerances
- Very large adjustment range
- Sound-insulating rubber for sound insulation (accessory)
TECEprofil section tube
- Maximum spans and greater safety in a fire through the closed profile made of galvanised steel section and additional beading at the edges
- Excellent structural properties: robust, stable and torsionally rigid
Tall, wide, safe. And yet so flexible.
Flexibility and stability complement each other with TECEprofil to form a single unit.
Realise large heights and installation spacings
With the TECEprofil support frame, you can build as high or wide as required – but always safely. And in accordance with the simplest of design rules. Sanitary walls of up to 4500 mm in height are possible. The same applies to mounting in front of a solid or drywall - or completely free-standing? Even large mounting distances of up to 1200 mm are no problem.
Standard wall
Standard wall, partial and room-high, with or without side attachment
Height: Standard 1150 mm, max. 4500 mm
Depth: min. 115 mm, max. 500 mm
Width: unlimited
Free-standing, partial-high sanitary wall
Height: Standard 1150 mm, max. 2100 mm
Depth: min. 210 mm
Width: max. 2400 mm
Room-high sanitary wall
Height: max. 4500 mm
Depth: min. 210 mm
Width: max. 2400 mm
Special wall
Partial and room-high corner construction 45° in front of a structural corner
Height: max. 4500 mm
Depth: min. 350 mm
Width: min. leg length 495 mm
Partial-high sanitary wall
Height: Standard 1150 mm, max. 2100 mm
Depth: min. 210 mm
Width: max. 2400 mm
Room divider
Height: max. 4500 mm
Depth: min. 170 mm
Width: a vertical strut is required every 2400 mm on either side of the wall.
Mounting level on structural shell
When planning and executing your design,
please note the assembly guidelines in our
Technical Information
Partial-high privacy wall (only approved for integrated fittings)
Height: max. 2100 mm
Depth: min. 170 mm
Width: max. 1200 mm