TECEdrainline – drains and accessories
Flexible, hygienic, reliable: right up to the drain, TECEdrainline offers details that make the tried and tested shower channel especially attractive for fitters and customers.
Optimised for tough days on site
The connection of the drain and channel is fitted with a strong snap lock that simply snaps shut when attached. It creates a sealed and secure connection. Yet the drain can still be rotated.
Flexible all-round
TECEdrainline drains can rotate 360° for particularly easy connection to the drain line.
Doubly safe against odours
the retrofittable membrane odour trap for TECEdrainline drains together with the sealing water ensures a dual siphon effect. It minimises the evaporation of sealing water via its membrane and locks out nasties – especially suitable for rarely used showers.
Easy to clean
In the case of stubborn blockages, the drain line can be cleaned with a small pipe cleaner. A marking on the inside shows the location of the drain nozzle for this purpose.
1 Sound decoupling, insulation
2 Edge insulation strips
3 Drain pot
4 Shower channel
5 Drain line
6 Screed
7 Combined sealing
8 Thin-bed tiling
(including sealing and tile adhesive)
h2: Height of drain includes shower channel, up to screed upper edge
h3: Height for sound insulation or insulation and drain line gradient
Drain as required
TECEdrainline drains are available in four variants for lateral connection as well as for vertical connection to the drain line. The drain trap is selected according to the drainage capacity required and the available floor installation height. The height for the floor insulation and the drain line gradient should also be considered when making a selection.
| Drain | h2*[mm] | Performance [l/s] |
|---|---|---|
| extra-flat | 53 | 0,5 |
| flat | 80 | 0,8 |
| standard | 105 | 0,9 |
| max. | 133 | 1,4 |
| vertical | 52 | 1,3 |
Drain extra-flat
TECEdrainline drain “extra-flat”, DN 40, side drain
Performance 0.5 l/s for rotatable assembly with the channel body, with removable siphon immersion pipe
Drain max
TECEdrainline drain „max“ DN 70, side drain
Performance 1,4 l/s, drain rotates 360°, with removable siphon immersion pipe
Drain flat
TECEdrainline drain „flat“ DN 50, side drain
Performance 0,8 l/s, Drain rotates 360°, with removable siphon immersion pipe
Drain vertical
TECEdrainline drain „vertical“ DN 50
Performance 1,3 l/s, drain rotates 360°, with removable siphon immersion pipe
Drain norm
TECEdrainline drain „standard“ DN 50, side drain
Performance 0,9 l/s, drain rotates 360°, with removable siphon immersion pipe
Assembly feet
Assembly feet to make it easy to adjust the height of the channel body and fix the position during shell assembly. Available in the heights 94 to 142 mm and 139 to 182 mm.
Drainbase sound insulation mat
Sound insulation mat for assembly under floating screed in the area of floor-level showers or throughout the bathroom. To reduce plumbing noises and impact sounds and for impact sound
insulation for renovations and new buildings.
Membrane odour trap
Plastic immersion pipe with inner sealing lip membrane as protection against evaporation, barrier against odour and vermin.
Hair trap
Hair trap made of stainless steel, for fitting
into the TECEdrainline channel body.
FireStop fire protection set
For direct assembly on the TECEdrainline DN 50 vertical drain, for highly fire resistant partitioning of ceiling bushings in solid ceilings.