TECEprofil – the solution: three components

Three components, all possibilities

You want to fulfil your customer’s wishes, design your everyday construction site activities and storage facilities as efficiently as possible, master technical challenges, assemble everything effortlessly and safely, comply with normative basics and deliver a safe installation. That’s a lot of requirements that we fulfil quite simply: with the basic components of TECEprofil.

TECEprofil corner joint

Connection is always automatically aligned at right angles
Simplified assembly through pre-tensioned compression springs
No die casting or plastic, but entirely sheet metal: also resistant in a fire

Der TECEprofil-Eckverbinder sorgt auch bei schräg abgelängtem Profilrohr für rechtwinklige Verbindungen.

Automatically rectangular

Tolerances of up to 10 mm are easily compensated for
Diagonally cut sections or incorrect dimensions can also be tolerated by several mm

TECEprofil angle bracket

The TECEprofil angle bracket is height- and depth-adjustable
Accepts tolerances on the solid or dry-wall construction wall at all times

Der TECEprofil-Befestigungswinkel sorgt für die stabile Verbindung mit der Wand.

Angle bracket in use

Solid bracket for wall attachment
Compensation of structural tolerances
Very large adjustment range
Sound-insulating rubber for sound insulation (accessory)

TECEprofil section tube

Maximum spans and greater safety in a fire through the closed galvanised steel section and additional beading at the edges
Excellent structural properties: robust, stable and torsionally rigid

Tall, wide, safe. And yet so flexible.

With TECEprofil, flexibility and stability supplement each other to form a unit.

Realise large heights and installation spacings

With the TECEprofil support frame, you can build as high or wide as required – but always safely. And in accordance with the simplest of design rules. Sanitary walls of up to 4500 mm in height are possible. As is attachment in front of a solid or drywall construction wall – or entirely free-standing. Large installation spacings of up to 1200 mm are also no problem.

Standard wall

TECEprofil Standardwand als Vorwand raumhoch oder niedriger

Standard wall, partial height and floor-to-ceiling height, with or without side attachment
Height: Standard 1150 mm, max. 4500 mm
Depth: min. 115 mm, max. 500 mm
Width: unlimited

TECEprofil frei stehende, teilhohe Sanitärwand

Free-standing, part-height sanitary wall
Height: Standard 1150 mm, max. 2100 mm
Depth: min. 210 mm
Width: max. 2400 mm

Room-height sanitary wall
Height: max. 4500 mm
Depth: min. 210 mm
Width: max. 2400 mm

Special wall

Partial height and room height corner construction 45° in front of a structural corner
Height: max. 4500 mm
Depth: min. 350 mm
Width: min. leg length 495 mm

Part-height sanitary wall
Height: Standard 1150 mm, max. 2100 mm
Depth: min. 210 mm
Width: max. 2400 mm

Room partition wall
Height: max. 4500 mm
Depth: min. 170 mm
Width: a vertical strut is required every 2400 mm on either side of the wall.